The following table contains information on the tablesONLINE/CICS error messages that can be encountered.
|
MSG # |
Text |
Meaning / Instructions |
|---|---|---|
|
TB-2000 I |
The program TBDRIVC terminated successfully. |
Information only. |
|
TB-2010 E |
Transfer Error: Transfer transaction TRIN was not found. |
TRIN is delivered as part of the TBOL product. Consult the tableBASE installation instructions. |
|
TB-2011 E |
Transfer Error: Invalid transaction. |
Target transaction is not defined properly to CICS. |
|
TB-2012 E |
Transfer Error: User not authorized to execute the transaction. |
Target transaction is not defined properly to CICS. |
|
TB-2013 E |
Transfer Error: Transaction is currently disabled. |
Target transaction is not defined properly to CICS. |
|
TB-2014 E |
Transfer Error: TWA size too small. |
Target transaction is not defined properly to CICS. |
|
TB-2015 E |
Transfer Error: Cannot retrieve PCT entry (Lock/Busy condition). |
Target transaction is not defined properly to CICS. |
|
TB-2016 E |
Transfer Error: Target program not found or is currently disabled. |
Target transaction is not defined properly to CICS. |
|
TB-5000 E |
Unexpected tableBASE error XXXX occurred while processing ‘XX’. |
Refer to the tableBASE error return codes for more information about errors processing command ‘XX’. If problem not explained, contact DataKinetics tableBASE support. |
|
TB-5001 I |
Enter Down command to view additional rows. |
Information only. |
|
TB-5002 I |
Enter Up command to view additional rows. |
Information only. |
|
TB-5003 W |
Enter Help command for a display of # lines of messages. |
Information only. |
|
TB-5004 I |
Enter Up or Down command to view additional rows. |
Information only. |
|
TB-5005 W |
You only have the authority to browse. Edit capability disabled. |
Information only. |
|
TB-5006 W |
You do not have the authorization to perform this function. |
Information only. Contact tableBASE administrator. |
|
TB-5007 E |
Indirect help could not be done because table could not be opened. |
See tablesONLINE/CICS User’s Guide for further information. |
|
TB-5008 E |
Indirect help could not be done because key could not be found. |
See tablesONLINE/CICS User’s Guide for further information. |
|
TB-5009 E |
Command ‘XXXXXXXXXXXXXXXXXXXX’ is not supported for hash organization. |
See tablesONLINE/CICS User’s Guide for further information. |
|
TB-5010 E |
Duplicate keys allowed accepts only a Y or N response. |
|
|
TB-5011 E |
The generation number supplied is incorrect. |
Occurs when the generation does not exist. |
|
TB-5012 E |
Library: xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx not on XXXXXXXX table. Contact your system administrator. |
Contact your tableBASE administrator. |
|
TB-5013 E |
Library selection failed. You are not authorized to modify ‘xxxxxxxx’. Please contact the tableBASE system administrator. |
Contact your tableBASE administrator. |
|
TB-5014 E |
Table open failed, you may not access tableBASE library: xxxxxxxx. |
|
|
TB-5015 E |
Indirect help not followed. Indirect points to indirect help. |
Only one level of indirect help is supported. |
|
TB-5016 E |
Invalid COMMAND: ‘XXXXXXXXXXXXXXXXXXXX’ for multi-user update mode. |
See tablesONLINE/CICS User’s Guide for further information. |
|
TB-5017 W |
There are no other windows established, enter ‘NEW’ to create another Window. |
Or you can enter NW on the command line. |
|
TB-5018 W |
This View restricts you to browse only. Edit capability disabled. |
Contact your tableBASE administrator. |
|
TB-5019 E |
Table ‘xxxxxxxx ‘ is accessed from a Read Only VTS region. Try Browse. |
You accessed a table residing on VTS as a result of the VTS name appearing in the tableBASE library list. If you want to EDIT this table, your profile on the TBOLACT table must be changed. Contact your tableBASE administrator. |
|
TB-5020 W |
The last field has been searched. To repeat from start press FINDFLD. |
The fields are searched from left to right or top to bottom starting from the cursor position. This message appears when the end of the fields have been reached. |
|
TB-5021 W |
The field name starting with ‘ ‘ is not found. |
|
|
TB-5023 E |
View key field only accepts an ‘Y’ or ‘N’ entry. |
|
|
TB-5029 I |
Changes to the view ‘xxxxxxxx’ have been cancelled. |
Information only. |
|
TB-5030 E |
The count entered is outside the table. Count of last row is xxxxxxxx. |
TBOL returns the last available row. |
|
TB-5031 I |
Changes to table ‘xxxxxxxx’ have been cancelled. |
Information only. |
|
TB-5032 I |
The previous row examined has been deleted. |
Information only. |
|
TB-5033 I |
The row has been added to the table. |
Information only. |
|
TB-5034 I |
A row with this key is already on the table. The row has been added. |
Information only. |
|
TB-5035 I |
The row has been updated. |
Information only. |
|
TB-5036 I |
A row with this key is already on the table. The row has been updated. |
Information only. |
|
TB-5037 E |
A row with this key is already on the table. Update rejected. |
|
|
TB-5038 W |
The count entered is outside the table. You are positioned at bottom. |
|
|
TB-5039 E |
The key entered does not match any row key on the table. |
Re-enter command as required. |
|
TB-5040 E |
The exit program ‘********’ could not be loaded. |
Exits from TBOL are defined in one of two places: in the View of the table being edited/browsed or in the TBOLACT table if processing commands. |
|
TB-5041 W |
The count entered is outside the table. You are positioned at the top. |
Re-enter command as required. |
|
TB-5042 W |
The first available row is: |
Warning occurs when attempting to locate a row before the previously displayed rows and a user exit program suppresses the display of rows according to the exit logic. |
|
TB-5043 W |
The last available row is: |
Warning occurs when attempting to locate a row after the previously displayed rows and a user exit program suppresses the display of rows according to the exit logic. |
|
TB-5044 I |
Table already in use. Multiple user access in effect. |
Information only. Multi user access is a View attribute. |
|
TB-5045 W |
This row is currently in use by ‘xxxxxxxx’ in the ‘aaaa’ application. |
When attempting to edit a row in use by another user xxxxxxxx. |
|
TB-5046 I |
Table accessed by multiple users has been closed. |
Information only. Multi user access is a View attribute. |
|
TB-5047 I |
Multiple user access in effect. Others may be browsing or editing. |
Information only. Multi user access is a View attribute. |
|
TB-5049 E |
Cannot close table ‘xxxxxxxx’. The table is open for write. |
Another TBOL Window, or an unrelated process is holding this table opened for write. Contact your system administrator. |
|
TB-5050 E |
The password supplied is invalid. |
|
|
TB-5051 W |
Changes have been made to table ‘XXXXXXXX’. To confirm that you indeed wish to cancel the changes: Select ‘CANCEL’ To avoid having all the changes lost: Select ‘ENTER’ or ‘END’. |
Information only. Follow message instructions as required. |
|
TB-5052 W |
Changes have been made to table ‘XXXXXXXX’. To confirm that you indeed wish to save the changes and create a new generation: Select ‘ENTER’ or ‘END’ To cancel the changes that have been made: Select ‘CANCEL’. To go back to editing without saving or canceling: Enter ‘RESHOW’. |
Information only. Follow message instructions as required. |
|
TB-5053 E |
Changes have been made to table ‘XXXXXXXX’. Changing the library, table, generation or password can only be done after work on the present generation is complete. In order to save the changes that have been made: Select ‘ENTER’ or ‘END’. To cancel the changes that have been made: Select ‘CANCEL’. |
Information only. Follow message instructions as required. |
|
TB-5054 W |
A request to delete row(s) from the table has been entered. To confirm that you indeed wish to delete the rows: Select ‘ENTER’ or ‘END’. To cancel the delete request: Select ‘CANCEL’. |
Information only. Follow message instructions as required. |
|
TB-5055 I |
Table ‘XXXXXXXX’ has been updated. |
Information only. |
|
TB-5056 I |
View ‘XXXXXXXX’ has been updated. |
Information only. |
|
TB-5057 W |
You have made changes to table ‘XXXXXXXX’ which may have been updated by other users. Several users may be updating this table simultaneously. The ‘CANCEL’ command may not have any effect because another user may have saved the table. To undo any changes you made… In order to save your changes and any changes made by other users: Select ‘ENTER’ or ‘END’. |
Information only. Follow message instructions as required. Multi user access is a View attribute. |
|
TB-5058 W |
You have made changes to table ‘XXXXXXXX’ which may have been updated by other users. In order to save your changes and any changes made by other users: Select ‘ENTER’ or ‘END’ To avoid saving the changes and cycling another generation: Select ‘CANCEL’. To go back to editing without saving: Enter ‘RESHOW’. |
Information only. Follow message instructions as required. Multi user access is a View attribute. |
|
TB-5059 W |
You have made changes to table ‘XXXXXXXX’ which may be being browsed by other users. Changing the library, table, generation or password can only be done after work on the present generation is complete. In order to save your changes and any changes made by other users: Select ‘ENTER’ or ‘END’. To avoid saving the changes and cycling another generation: Select ‘CANCEL’. |
Information only. Follow message instructions as required. Multi user access is a View attribute. |
|
TB-5060 W |
You are not authorized to use the M2M command. Contact DataKinetics tableBASE support. |
Contact DataKinetics tableBASE support. |
|
TB-5061 W |
A range of nnnnnn row(s) has been selected for deletion. Because some rows may be suppressed from view, the actual number to be deleted may be less. To confirm that you indeed wish to delete the rows: Select ‘ENTER’ or ‘END’. To cancel the delete request: Select ‘CANCEL’. |
Information only. Follow message instructions as required. |
|
TB-5062 E |
Listing the contents of the VTS attached to xxxxxxxx is not supported. |
Contact DataKinetics tableBASE support. |
|
TB-5063 E |
Internal error ‘9999’ creating a directory listing. |
Contact DataKinetics tableBASE support. |
|
TB-5064 E |
You are trying to create a duplicate primary key. Update rejected. Primary key fields are hi-lighted with a different color. |
View Attribute |
|
TB-5065 E |
Delete enqueue error. Non-existing key: xxxxxxxxxxxxxxxxxxxx |
Record the Key. It may help pinpoint an issue. |
|
TB-5066 E |
The row with primary key: xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx has been deleted or moved by another user. |
Record the Key. It may help pinpoint an issue. |
|
TB-5500 W |
Exit program called with invalid indicators: |
User Exit error. Contact tableBASE administrator. |
|
TB-5501 W |
Field name is spaces. |
|
|
TB-5502 W |
To indicate a key field code Y. Otherwise leave blank or code N. If the field is a Dynamic View Suffix, code S. If it is also a key field as well as the Dynamic View Suffix, code B. If this is a View for Editing a table using an Alternate Index and the Primary Key of the table is in a different location, code P. If a Primary Key Field and an Alternate Index Key Field overlap, code X. |
|
|
TB-5503 E |
Invalid display or internal table format. |
With Cursor on field, press Help (PF1). |
|
TB-5504 W |
Display length must be xxxx and has been substituted. |
|
|
TB-5505 E |
Display length must be in the range xxxx through xxxx. |
With Cursor on field, press Help (PF1). |
|
TB-5506 W |
Internal table length must be xxxx and has been substituted. |
|
|
TB-5507 E |
Internal table length must be in the range xxxx through xxxxx. |
With Cursor on field, press Help (PF1). |
|
TB-5508 E |
Invalid edit length code ‘X’ on TBOLHKFM table. Valid values are: blank, D, E, H, N, P, Q, 0. |
|
|
TB-5509 E |
Invalid attribute. Pick N, C, F, D, Q, S, P, p, M, m, V, v, or blank. |
With Cursor on field, press Help (PF1). |
|
TB-5510 E |
Invalid feature, must be D, N, Y, ‘:’ or blank. |
With Cursor on field, press Help (PF1). |
|
TB-5511 E |
Invalid action code. It must be Y, N, R, E, I, D, C, U, or blank. |
With Cursor on field, press Help (PF1). |
|
TB-5512 W |
Program name ‘xxxxxxxx’ does not exist. |
|
|
TB-5513 E |
Invalid direction, must be I for inbound to display or O for outbound. |
With Cursor on field, press Help (PF1). |
|
TB-5514 E |
Invalid timing, must be B for before system action or A for after. |
With Cursor on field, press Help (PF1). |
|
TB-5515 E |
Key fields must be contiguous. Check field ====> |
|
|
TB-5516 E |
Display length must equal internal table length. |
With Cursor on field, press Help (PF1). |
|
TB-5517 E |
Display length should equal table length or table length + 1. |
With Cursor on field, press Help (PF1). |
|
TB-5518 E |
Display length should equal (2 * table length). Subtract 1 if no sign. |
With Cursor on field, press Help (PF1). |
|
TB-5519 E |
Display length must equal 2 * table length. |
With Cursor on field, press Help (PF1). |
|
TB-5520 E |
Display length should equal table length + 1 or table length + 2. |
With Cursor on field, press Help (PF1). |
|
TB-5521 E |
Display length should equal (2 * table length). Add 1 if signed. |
With Cursor on field, press Help (PF1). |
|
TB-5522 W |
Exit program entered without setting exit indicators. |
User Exit error. Contact tableBASE administrator. |
|
TB-5523 E |
You may not move a field to a position before a key field. |
In display mode of View edit the keys are always grouped first. |
|
TB-5524 E |
You cannot add new physical fields in display mode. |
|
|
TB-5525 E |
You may not move a key field. |
|
|
TB-5526 E |
You cannot delete a field in display mode. |
|
|
TB-5527 E |
The number of key fields must be between 1 and 50 inclusive. |
|
|
TB-5528 E |
The total length of the key fields must not be greater than 256. |
|
|
TB-5529 W |
Application specific help table ‘XXXXXXXX’ not found on any library. |
|
|
TB-5530 E |
Invalid field location for field: View may be corrupt – contact your technical support person. |
If the error cannot be explained, contact DataKinetics tableBASE support. |
|
TB-5531 E |
The Data Table is currently in use. |
Not used in Version 6 TBOL |
|
TB-5532 W |
Data/Index ‘xxxxxxxx’ requires RSZ, KSZ, KLOC: nnnnnnnnnnnnnnnnnnn, in order to conform to the View just defined. Change the values of the row size, key size & location of the physical Data Table to conform to the View. If this is a View for an Alternate Index the warning above may not apply. Please note the KEY SIZE, and KEY LOCATION so that these values can be used to verify the Alternate Index Definition – Option 6 on the Define Table and View menu. |
|
|
TB-5533 E |
Data Table ‘xxxxxxxx’ is in use – try again later. |
Occurs when attempting to edit a table. |
|
TB-5534 E |
You cannot change the keys or suffix in display mode. |
For some applications, a different display order is possible. Contact DataKinetics tableBASE support. |
|
TB-5535 E |
You cannot change fields to be key fields while in display mode. |
Go to DEFINE VIEW on the “Define Table and View” menu to change key fields. |
|
TB-5536 E |
The total length of the key fields must be greater than zero. |
|
|
TB-5537 E |
Number of delimiters must be equal the display length. |
|
|
TB-5538 E |
The display mask must include a valid sign symbol. |
This applies to numeric Display Formats N and 0 through 9. |
|
TB-5539 E |
The display mask must have ‘X’ decimal places. |
This has to match the number of decimals places of the Display Format |
|
TB-5540 E |
The number of delimiters must be one less than the display length. |
|
|
TB-5541 E |
The trigger field name supplied is not valid. A trigger field must be defined with an action code of Y, R or E. |
Verify the spelling of the Trigger field name. It must be a field already defined in the View. |
|
TB-5542 E |
Invalid decimal point encountered at position ‘XX’. |
|
|
TB-5543 W |
Edit pattern only allowed for display format of ‘X’. |
|
|
TB-5544 W |
Invalid or incomplete pattern delimiter encountered at position ‘XX’. |
|
|
TB-5545 E |
Number of edit pattern symbols must be equal to display length. |
|
|
TB-5546 E |
View ‘XXXXXXXX’ is in use by another application. |
Someone else is editing the View. |
|
TB-5547 E |
The field format and/or length differs from source key field. |
|
|
TB-5548 E |
Source field format and/or length differs from importation field. |
|
|
TB-5549 E |
Source field name required for duplication action. |
|
|
TB-5550 E |
The source field name entered already has a duplication action defined |
If you want multiple duplicates, always take the value from a single source field. |
|
TB-5551 E |
Source field format and/or length differs from duplication field. |
|
|
TB-5552 E |
Create date or update date action codes apply only to date fields. |
|
|
TB-5553 E |
The source field is not a key field as required for action Y, R or E. |
|
|
TB-5554 E |
The source field specified is not the entire key of the corresponding source Data Table. |
|
|
TB-5555 E |
Source field name not defined in the view. |
|
|
TB-5556 E |
Importation action requires a previously defined field with an action code of Y, R or E. |
|
|
TB-5557 E |
Internal view alternate table access failed. |
Contact DataKinetics tableBASE support. |
|
TB-5558 E |
Source field must be the entire key of the Source Table. |
|
|
TB-5559 E |
A FIELD FORMAT of P, F, or H cannot be used as a dynamic View suffix. |
Only formats that define displayable characters are supported. |
|
TB-5560 E |
The source field name entered must not be the same as the target field |
|
|
TB-5561 A |
A row on view ‘xxxxxxxx’ cannot be found. Internal error. Abort task. |
Contact DataKinetics tableBASE support. |
|
TB-5562 E |
tableBASE error ‘XXXX’ occurred creating internal table ‘RSXXXXXX’. |
You may have too small a TSR (tableSPACE Region). |
|
TB-5563 E |
tableBASE error ‘XXXX’ occurred storing internal table ‘RSXXXXXX’. |
Target library is Read Only. |
|
TB-5564 E |
The total length of all fields: 99999 exceeds 32,763 bytes. |
32,763 bytes is the maximum row size. |
|
TB-5565 W |
The attribute V or v cannot be used with display format Y. The attribute has been set to a space. |
|
|
TB-5566 E |
The target field must be 8 bytes to receive a DDNAME from the list or it must be 44 bytes to receive a DATASET NAME. |
|
|
TB-5567 E |
The target field must be 8 bytes to receive a table or view name. |
|
|
TB-5568 E |
More than one dynamic suffix. Check field ====> |
|
|
TB-5569 E |
The total length of the Primary key fields must be less than 257. |
The sum of the lengths of all fields comprising a key must be 256 or less. |
|
TB-5570 E |
The FIELD LENGTH/FORMAT must be ‘8’ ‘X’ or ‘U’ respectively for the insert USERID action code ‘B’ |
|
|
TB-5571 E |
‘xxxxxxxx’ is not a valid TBOL view. |
Verify view, and re-issue. |
|
TB-5600 W |
Exit called for a table it doesn’t know about. Table is xxxxxxxx. |
|
|
TB-5601 E |
You cannot delete your own session. Action ignored. |
Information only. |
|
TB-5700 W |
Utility processing is bypassed as the current operating mode is ‘X’. |
Contact DataKinetics tableBASE support. Very likely the XXXXMENU table has errors. |
|
TB-5701 W |
Invalid action. Use S to select a utility. |
Information only. Follow message instructions as required. |
|
TB-5702 W |
Table ‘xxxxxxxx’ has been copied as ‘xxxxxxxx’. |
Information only. |
|
TB-5703 W |
Table ‘xxxxxxxx’ has been renamed to ‘xxxxxxxx’. |
Information only. |
|
TB-5704 W |
Table ‘xxxxxxxx’ has been deleted. |
Information only. |
|
TB-5705 W |
View ‘xxxxxxxx’ has been copied as ‘xxxxxxxx’. |
Information only. |
|
TB-5706 W |
View ‘xxxxxxxx’ has been renamed to ‘xxxxxxxx’. |
Information only. |
|
TB-5707 W |
View ‘xxxxxxxx’ has been deleted. |
Information only. |
|
TB-5708 W |
A generation of table ‘xxxxxxxx’ has been deleted. |
Information only. |
|
TB-5709 W |
User profile has been updated. |
Information only. |
|
TB-5710 W |
Application table ‘xxxxxxxx’ has been copied as ‘xxxxxxxx’. |
Information only. |
|
TB-5711 E |
Function cannot be performed: Table ‘xxxxxxxx’ not found. |
|
|
TB-5712 E |
Utility failed: Table ‘xxxxxxxx’ is currently in use. |
Try again later, or contact tableBASE administrator. |
|
TB-5713 E |
Utility failed: Table ‘xxxxxxxx’ already exists on library. |
|
|
TB-5714 E |
Utility: View ‘xxxxxxxx’ parameters not currently defined. |
|
|
TB-5715 E |
Utility failed: view ‘xxxxxxxx’ already exists on the library. |
|
|
TB-5716 E |
Utility cannot be performed: View ‘xxxxxxxx’ not found. |
|
|
TB-5717 E |
Utility failed: Prefix required to generate a new set of tables. |
|
|
TB-5718 E |
Utility failed: Invalid tableBASE library. DDNAME: xxxxxxxx. |
|
|
TB-5719 W |
DDNAME xxxxxxxx not on ‘xxxxxxxx’ – contact your system administrator. |
Contact your tableBASE administrator. |
|
TB-5720 E |
Utility failed: Invalid password supplied. |
Try again, or contact tableBASE administrator. |
|
TB-5721 W |
Table ‘xxxxxxxx’ has been defined. |
Information only. |
|
TB-5722 W |
Table ‘xxxxxxxx’ definition has been updated. |
Information only. |
|
TB-5723 W |
Supplemental information of view ‘XXXXXXXX’ has been updated. |
Information only. |
|
TB-5724 E |
Reducing row size may result in data loss. Press execute to continue. |
Information only. Follow message instructions as required. |
|
TB-5725 E |
The passwords for table ‘xxxxxxxx’ have been changed. |
Information only. |
|
TB-5726 W |
Alternate Index ‘xxxxxxxx’ has been defined for table ‘xxxxxxxx’. |
Information only. |
|
TB-5727 E |
Table ‘xxxxxxxx’ from a different library is currently in use. |
|
|
TB-5728 E |
Illegal To prefix ‘xxxx’. |
|
|
TB-5729 E |
Blank table name. This is a required entry. |
|
|
TB-5730 E |
Invalid generation. |
|
|
TB-5731 E |
Function not performed – tableBASE library XXXXXXXX is full. |
|
|
TB-5732 E |
tableBASE library must be entered. |
|
|
TB-5733 E |
The RSZ, KSZ & KLOC have been updated to conform to an updated view. If these values are not required and the original values of the data are to be used, select ENTER again immediately upon return. Press EXECUTE to change the Data Table to conform to the VIEW. This could result in data loss if you are reducing the row size. |
Information only. Follow message instructions as required. |
|
TB-5734 W |
Table is not an alternate. Fields filled in from the Data Table. |
|
|
TB-5735 E |
Table ‘xxxxxxxx’ is an alternate for Data Table ‘xxxxxxxx’. |
|
|
TB-5736 W |
The RSZ, KSZ & KLOC have been filled in from the view. |
|
|
TB-5737 W |
View ‘xxxxxxxx’ could not be found and was not renamed. |
|
|
TB-5738 W |
Alternate Index ‘xxxxxxxx’ has been updated for table ‘xxxxxxxx’. |
|
|
TB-5739 E |
New name cannot be the same as old name. |
|
|
TB-5740 E |
This operation is not supported for tables from/to the VTS server. |
|
|
TB-5741 E |
Alternates should not be updated with this option. Use option 6. |
The name used was that of an Alternate Index. |
|
TB-5742 W |
Utilities function error. There is no processing logic for row ID ‘X’. |
Contact DataKinetics tableBASE support. |
|
TB-5743 E |
Utility failed: Invalid password supplied for target. |
|
|
TB-5744 E |
The SYSIN parameter starting with ‘ xxxxxxxx . . . . ‘ cannot be found. |
There is an error in the TBOLJCLx template table. Cannot identify the JCL statement. Contact DataKinetics tableBASE support. |
|
TB-5745 E |
The JES spool data set could not be opened, reason code ‘9999’. |
Contact your CICS system administrator. |
|
TB-5746 E |
The JES spool data set could not be closed, reason code ‘9999’. |
Contact your CICS system administrator. |
|
TB-5747 E |
The JES spool data set could not be written to, reason code ‘9999’. |
Contact your CICS system administrator. |
|
TB-5748 E |
The JCL template table, ‘xxxxxxxx’ does not exist. Please re-enter. |
Re-enter command as required. |
|
TB-5749 E |
The variable ‘ ‘ in JCL statement 00000000 was not replaced. |
There is an error in the TBOLJCLx template table. The template JCL statement is missing a search for value. Contact DataKinetics tableBASE support. |
|
TB-5750 E |
The JCL statement starting with ‘//xxxxxxxx . . . . ‘ cannot be found. |
There is an error in the TBOLJCLx template table. |
|
TB-5751 I |
Job ‘xxxxxxxx’ has been submitted to generate copybook ‘mmmmmmmm’. |
Information only. |
|
TB-5752 E |
The generated JCL from template ‘xxxxxxxx’ for table/view ‘tvtvtvtv’has been submitted with an error. Please examine the JES queue to ensure that the generated JCL contain the correct program name and that the keyword substitutions have been accurately performed for this function. |
Examine the JES queue and determine the error before re-submission. You may need to change the accounting information. |
|
TB-5753 I |
Job ‘xxxxxxxx’ has been submitted to print table ‘tttttttt’. |
Information only. |
|
TB-5754 E |
Alternate definition failed: Table ‘xxxxxxxx’ already exists. Use Execute with ‘UPDATE’ on command line to replace alternate table. |
Information only. Follow message instructions as required. |
|
TB-5755 E |
Copy cannot be performed: Table ‘xxxxxxxx’ exists on target library. |
|
|
TB-5756 E |
Update of alternate failed: Alternate table ‘xxxxxxxx’ does not exist. |
|
|
TB-5757 E |
Copy cannot be performed: View ‘xxxxxxxx’ exists on target library. |
|
|
TB-5758 I |
Job ‘xxxxxxxx’ has been submitted to print View definition ‘vvvvvvvv’. |
Information only. |
|
TB-5759 I |
The alternate definition name ‘xxxxxxxx’ is unavailable – (not found). |
Information only. |
|
TB-5760 E |
Enter the name of a table that contains the restructuring rules. |
Follow message instructions as required. This table would have been saved from a prior visit to the Data Restructuring Utility. |
|
TB-5761 E |
Re-enter a different name. |
Re-enter a different name as required. |
|
TB-5762 E |
The restructuring table, ‘xxxxxxxx’ does not exist. Please re-enter. |
Re-enter restructuring table name as required. |
|
TB-5763 E |
Enter Y or N to indicate the generations you want to restructure. |
Information only. Follow message instructions as required. |
|
TB-5764 I |
The restructuring table, XXXXXXXX is not a valid restructuring table. |
Information only. The restructuring table contains information to restructure tables. It can only be processed by TBOL. |
|
TB-5765 E |
Restructuring tbl: XXXXXXXX requires RSZ/KSZ/ KLOC:nnnnnnnnnnnnnnnnnnn. The Data Table that has been entered cannot be restructured with this restructuring rules table. |
The Restructuring table does not match the basic information of the data table that you are attempting to restructure. |
|
TB-5766 E |
Generation (-x) of the data has RSZ/KSZ/KLOC: nnnnnnnnnnnnnnnnnnn. This does not conform to the latest generation. Restructuring aborted. Restructuring is possible with the most recent generation. Set the All Generations flag to N so only the most recent is restructured. |
Older generations of the data table do not have the same layout as the latest generation from which the restructuring data was taken from. |
|
TB-5767 I |
N generation(s) of the table ‘XXXXXXXX’ has been restructured. |
Information only. |
|
TB-5768 I |
The restructuring rules are saved in the table ‘xxxxxxxx’. |
Information only. |
|
TB-5769 E |
If the restructuring rules are to be saved for future use with other tables, enter a restructuring table name. |
Information only. Follow message instructions as required. The name should be recorded so it can be used at a later time or deleted if it is never used again. |
|
TB-5770 I |
The data is already restructured. Use END or CANCEL to exit utility. |
Information only. |
|
TB-5771 E |
Although you have elected not to restructure the Data Table(s) at this time, it is essential to enter a name to save the restructuring table for use at a later date. If this is not a requirement, enter CANCEL to avoid a repeat of this message. |
Information only. Follow message instructions as required. |
|
TB-5772 E |
FLD: xxxxxxxxxxxxxxxxxxxx Error: One of the rows from the existing table cannot be converted. |
|
|
TB-5773 E |
Data Table ‘XXXXXXXX’ cannot be stored, library ‘XXXXXXXX’ is full. Free up some space on the target library, return to this option (7), and try again. |
Open up another Window and delete an unused table to free up some space |
|
TB-5774 |
The name ‘XXXXXXXX’ entered is either an alternative index or a paged table and cannot be restructured directly. For alternate indexes restructure the underlying base Data Table. For a paged table, change it to an in-memory table using the utility TBEXEC. |
For alternate indexes: Restructure the underlying base Data Table. For a paged table: Change it to an in-memory table using the utility TBEXEC. |
|
TB-5775 E |
The variable ‘ ‘ in SYSIN statement 00000000 was not replaced. |
There is an error in the TBOLJCLx template table. The template JCL statement is unable to replace a search for value. Contact DataKinetics tableBASE support. |
|
TB-5777 W |
The Multi-User table update option requires unique primary keys. If this is the VIEW for a table (not an Alternate Index), set the DUPLICATE KEY IND to ‘N’. Press HELP for more details. |
Follow message instructions as required. |
|
TB-5778 E |
The Multi-User table update option requires unique primary keys. |
With Multi-User updates, TBOL cannot process tables that have duplicate primary keys. |
|
If this is the VIEW for an Alternate Index, set the DUPLICATE PRIME KEYS to ‘N’ when MULTIPLE USER UPDATE is set to ‘M’. |
With Multi-User updates, TBOL cannot process tables that have duplicate primary keys. |
|
|
TB-5801 E |
## – Action Error: |
The ## identifies the field that has the Error: xxx.. Often pressing help gives you the list of values to pick from. |
|
TB-5802 E |
## – Import Error: |
The ## identifies the field that has the Error: xxx.. |
|
TB-5803 E |
## – Duplication Error: |
The ## identifies the field that has the Error: xxx.. |
|
TB-5804 E |
## – Mandatory Error: An EOF erase does not constitute a valid key stroke. Spaces are valid. |
The ## identifies the field that has the Error: xxx.. |
|
TB-5805 E |
## – Pattern: ‘XXXXXXXX’ does accept data as entered. Refer to legend below: Z – alphabetic; |
The ## identifies the field that has the Error: xxx.. |
|
TB-5806 E |
## – Verification Error: |
The ## identifies the field that has the Error: xxx.. |
|
TB-5811 E |
The source View ‘xxxxxxxx’ not found. |
The Source View is required to locate the import data. |
|
TB-5812 E |
The source Data table ‘xxxxxxxx’ not found. |
Data importation is not possible. |
|
TB-5813 E |
The source table ‘xxxxxxxx’ is password protected. |
Data importation is not possible. |
|
TB-5814 E |
tableBASE error ‘xxxxx’ occurred opening Source Table ‘xxxxxxxx’. |
Refer to the tableBASE error return codes for more information. |
|
TB-5815 E |
Source Table, ‘xxxxxxxx’ must be in descending order for x’ action. |
Data importation is not possible. |
|
TB-5816 E |
The length of field ‘xxxxxxxxxxxxxxxx’ and Source Table ‘xxxxxxxx’ key field length do not match. |
Data importation is not possible. |
|
TB-5817 E |
Source field ‘xxxxxxxxxxxxxxxx’ not found in table ‘xxxxxxxx’. |
Data importation is not possible. |
|
TB-5818 E |
Source field ‘xxxxxxxxxxxxxxxx’ in table ‘xxxxxxxx’ is not a key. |
Data importation is not possible. |
|
TB-5819 E |
Source field ‘xxxxxxxxxxxxxxxx’ in source view ‘xxxxxxxx’ has a different length than the field defined in the view. |
Data importation is not possible. |
|
TB-5820 E |
Source field ‘xxxxxxxxxxxxxxxx’ in source view ‘xxxxxxxx’ is not the entire key of the corresponding source Data Table. |
Data importation is not possible. |
|
TB-5821 E |
Source field ‘xxxxxxxxxxxxxxxx’ in source view ‘xxxxxxxx’ has a different format than the field defined in the view. |
Data importation is not possible. |
|
TB-5822 E |
tableBASE error ‘xxxx’ occurred creating internal table ‘SPxxxxx’. |
Refer to the tableBASE error return codes for more information. If problem not explained, contact DataKinetics tableBASE support. |
|
TB-5823 E |
tableBASE error ‘xxx’ occurred emptying internal table ‘ECxxxxxx’. |
Refer to the tableBASE error return codes for more information. If problem not explained, contact DataKinetics tableBASE support. |
|
TB-5824 E |
tableBASE error ‘xxxx’ occurred creating internal table ‘ECxxxxxx’. |
Refer to the tableBASE error return codes for more information. If problem not explained, contact DataKinetics tableBASE support. |
|
TB-5825 E |
tableBASE error ‘xxxx’ occurred deleting internal table ‘ECxxxxx’. |
Refer to the tableBASE error return codes for more information. If problem not explained, contact DataKinetics tableBASE support. |
|
TB-5826 E |
tableBASE error ‘xxxx’ occurred deleting internal table ‘SPxxxxx’. |
Refer to the tableBASE error return codes for more information. If problem not explained, contact DataKinetics tableBASE support. |
|
TB-5827 E |
Upper range ‘xxxxxxxxxxxxxxxx’ in source view ‘xxxxxxxx’ has a different length than the lower range field. |
Data importation is not possible. |
|
TB-5828 E |
Upper range ‘xxxxxxxxxxxxxxxx’ in source xxxxxxxx’ has a different format than the lower range field. |
Data importation is not possible. Fix the format mismatch first. |
|
TB-5829 E |
Lower range ‘xxxxxxxxxxxxxxxx’ in source view ‘xxxxxxxx’ has no corresponding upper range field for action R. |
Data importation is not possible. Fix the format mismatch first. |
|
TB-5830 E |
Internal get storage failed for data importation processing. |
Data importation is not possible. |
|
TB-5832 E |
View data importation pointers corrupted. |
Contact DataKinetics tableBASE support. |
|
TB-5833 E |
View data duplication pointers corrupted. |
Contact DataKinetics tableBASE support. |
|
TB-5834 E |
Upper range in source Data Table ‘xxxxxxxx’ is too short or missing. |
Data importation is not possible. |
|
TB-5835 E |
Initial value does not conform to the display format or edit pattern. |
|
|
TB-5836 E |
Highest bound does not conform to the display format or edit pattern. |
|
|
TB-5837 E |
Lowest bound does not conform to the display format or edit pattern. |
|
|
TB-5838 E |
The Lowest bound value is greater than Highest bound value. |
|
|
TB-5839 E |
Both the Highest and Lowest bound values must be specified. |
|
|
TB-5840 E |
The Initial value is not between the Highest and Lowest bounds. |
|
|
TB-5841 E |
Initial value has longer length than the display length. |
|
|
TB-5842 E |
Lowest bound value has longer length than the display length. |
|
|
TB-5843 E |
Highest bound value has longer length than the display length. |
|
|
TB-5844 E |
## – Value Lower than bound: ‘lllllllllllllllllllllllllllllllllll’. Please enter a value greater than the lower bound indicated. |
The ## identifies the field that has the Error. Enter a value greater than the lower bound indicated. |
|
TB-5845 E |
## – Value Greater than bound: ‘uuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuu’. Please enter a value lower than the upper bound indicated. |
The ## identifies the field that has the Error. Enter a value lower than the upper bound indicated. |
|
TB-5897 E |
QIDERR error: command code ‘xxxx’ response code ‘xxxxxxxxxxxx’. A CICS related operational resource is unavailable. The table directory listing was aborted. Please try HELP again (PF1). |
The table directory listing was aborted. Please try HELP again (PF1). |
|
TB-5898 E |
QIDERR error: command code ‘xxxx’ response code ‘xxxxxxxxxxxx’. A CICS related operational resource is unavailable. You cannot continue to edit the table. Table rows may have been updated. In order not to lose any changes, You must exit the table editor and save any changes. After exiting this message screen, press END (PF3) from the Identify Table/Row screen. |
Exit the table editor and save any changes. After exiting this message screen, press END (PF3) from the Identify Table/Row screen. |
|
TB-5899 E |
QIDERR error: command code ‘xxxx’ response code ‘xxxxxxxxxxxx’. A CICS related operational resource is unavailable. You cannot continue to edit/browse the table. After exiting this message screen, press END (PF3) from the Identify Table/Row screen and try editing or browsing the table at a later time. |
Try editing or browsing the table at a later time. |
|
TB-5900 W |
Help message unavailable, message ‘xxxxxxx’ not on table ‘xxxxxxxx’. |
|
|
TB-5901 E |
Unable to open table ‘xxxxxxxx’, reason code 9999. |
Refer to the tableBASE error return codes for more information. If problem not explained, contact DataKinetics tableBASE support. |
|
TB-5902 E |
Unable to invoke alternate table ‘xxxxxxxx’, reason code 9999. |
Refer to the tableBASE error return codes for more information. If problem not explained, contact DataKinetics tableBASE support. |
|
TB-5903 W |
Help information for table ‘xxxxxxxx’ is not found on table ‘xxxxxxxx’ |
|
|
TB-5904 W |
DESC: ‘xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx’ not on ‘xxxxxxxx’ |
This could occur when a DESCription with key has been deleted. |
|
TB-5905 A |
Error creating table ‘XXXXXXXX’, reason code 9999. Job aborted. |
Refer to the tableBASE error return codes for more information. If problem not explained, contact DataKinetics tableBASE support. |
|
TB-5906 W |
Tutorial data ‘xxxxxxxxxxxxxxxxxxxxxxxx’ not found on table ‘xxxxxxxx’. |
|
|
TB-5907 E |
This PF key has not been defined on the PFK table. |
|
|
TB-5908 W |
This application does not have items defined on menu table ‘xxxxxxxx’. |
Refer to the tablesONLINE/CICS User’s Guide for creation of Menu Items. |
|
TB-5909 W |
Help data ‘xxxxxxxxxxxxxxxxxxxxxxxx’ not on table ‘xxxxxxxx’ |
Refer to the tablesONLINE/CICS User’s Guide for creation of Menu Items. |
|
TB-5910 E |
Transfer program ‘xxxxxxxx’ of menu option ‘xxxx’ not found/ disabled. |
Refer to the tablesONLINE/CICS User’s Guide for creation of Menu Items. |
|
TB-5911 E |
Blank transfer parameters for menu option ‘XXXX’ |
Refer to the tablesONLINE/CICS User’s Guide for creation of Menu Items. |
|
TB-5912 E |
Invalid COMMAND or OPTION: ‘xxxxxxxxxxxxxxxxxxxxxxxx’, please re-enter. |
Re-enter command as required. |
|
TB-5913 E |
Transfer option ‘xxxxxxxxxxxxxxxx’ is not found on menu table ‘xxxxxxxx’. |
Refer to the tablesONLINE/CICS User’s Guide for creation of Menu Items. |
|
TB-5914 W |
The value entered for this command should be numeric. |
Re-enter command as required. |
|
TB-5915 W |
Additional tutorial information is not found on table ‘xxxxxxxx’. |
|
|
TB-5916 E |
The keys are protected. The row cannot be deleted in this mode. |
|
|
TB-5917 E |
Command or option ‘xxxxxxxxxxxxxxxx’ not supported for browse. |
See tablesONLINE/CICS User’s Guide for further information. |
|
TB-5918 E |
Command or option ‘xxxxxxxxxxxxxxxx’ unsupported for hash tables. |
See tablesONLINE/CICS User’s Guide for further information. |
|
TB-5919 E |
There are no rows on the table. |
|
|
TB-5920 E |
View ‘xxxxxxxx’ cannot be found on the library searched. |
|
|
TB-5921 E |
View ‘xxxxxxxx’ is empty. |
|
|
TB-5922 E |
Unable to open view ‘xxxxxxxx’, reason code 9999. |
Refer to the tableBASE error return codes for more information. If problem not explained, contact DataKinetics tableBASE support. |
|
TB-5923 W |
Dynamic open of view ‘xxxxxxxx’ failed, reason code 9999. |
Refer to the tableBASE error return codes for more information. If problem not explained, contact DataKinetics tableBASE support. |
|
TB-5924 W |
Dynamic open failed. View ‘xxxxxxxx’ not found. |
|
|
TB-5925 E |
tablesONLINE system table ‘xxxxxxxx’ is not on any library searched. |
|
|
TB-5926 E |
Unable to open tablesONLINE system table ‘xxxxxxxx’, reason code 9999. |
Refer to the tableBASE error return codes for more information. If problem not explained, contact DataKinetics tableBASE support. |
|
TB-5927 E |
tablesONLINE system table ‘xxxxxxxx’ is empty. |
|
|
TB-5928 E |
tablesONLINE system table ‘xxxxxxxx’ is in use by another application. |
|
|
TB-5929 W |
Dynamic open failed. View ‘xxxxxxxx’ is empty. |
|
|
TB-5930 E |
## – Conversion Error: |
The ## identifies the field that has the Error: xxx.. |
|
TB-5931 E |
## – Conversion Error: |
The ## identifies the field that has the Error: xxx.. |
|
TB-5932 E |
Key field ## – Conversion Error: |
The ## identifies the field that has the Error: xxx.. |
|
TB-5933 E |
View ‘xxxxxxxx’ is in use by another application. |
|
|
TB-5934 E |
Data Table ‘xxxxxxxx’ cannot be stored, library ‘xxxxxxxx’ is full. In order not to lose the work just completed, enter another Window and free up some space by deleting unnecessary tables. Once this is done: Select ‘ENTER’ or ‘END’. To cancel the changes that have been made: Select ‘CANCEL’. |
Follow message instructions as required. |
|
TB-5935 E |
Data Table ‘xxxxxxxx’ is in use by another application. Try browse. |
|
|
TB-5936 E |
View ‘xxxxxxxx’ cannot be stored, library ‘xxxxxxxx’ is full. In order not to loose the work just completed, enter another Window and free up some space by deleting unnecessary tables. Once this is done: Select ‘ENTER’ or ‘END’. To cancel the changes that have been made: Select ‘CANCEL’. |
Follow message instructions as required. |
|
TB-5937 E |
View defines row size of 00000 which differs from table RSZ of 00000. |
In order to use this View, you must make the Key size, Row size and Key location match the Data table. |
|
TB-5938 E |
View defines key location 00000 which differs from tbl location 00000. |
In order to use this View, you must make the Key size, Row size and Key location match the Data table. |
|
TB-5939 E |
View defines key size of 0000 which differs from table key of 0000. |
In order to use this View, you must make the Key size, Row size and Key location match the Data table. |
|
TB-5940 E |
Data Table ‘xxxxxxxx’ is not on any library searched. |
|
|
TB-5941 E |
Default Data Table ‘xxxxxxxx’ is not on any library searched. |
|
|
TB-5942 E |
You cannot create ‘xxxxxxxx’. The table already exists. |
|
|
TB-5943 W |
Dynamic open failed. View row size 00000 does not match table 00000. |
In order to use this View, you must make the Key size, Row size and Key location match the Data table. |
|
TB-5944 E |
View ‘xxxxxxxx’ cannot be found. Enter NEW command to create view. |
Enter NEW on the command line to create an View. |
|
TB-5945 W |
The table in memory is not the latest generation. |
This occurs if another User or application has the table Open for Read in the TSR and you are trying to open the latest copy from the library, that was updated by another application since the table was opened in this TSR. |
|
TB-5946 E |
The table in TSR is not the latest generation. Update access denied. |
This occurs if another user or application has the table Open for Read in the TSR and you are trying to open the latest copy from the library, that was updated by another application since the table was opened in this TSR. Close the table in the TSR and try the edit again. The tableBASE administrator can go to option 2 on the Administrators Menu to find the User that has the table open. |
|
TB-5947 E |
Table is in use by another application. Changes cannot be cancelled. |
|
|
TB-5948 W |
Help information for menu ‘xxxxxxxx’ is not found on table ‘xxxxxxxx’. |
|
|
TB-5950 E |
The keys are protected. A new row cannot be inserted in this mode. |
|
|
TB-5951 A |
This application is now continued at another terminal. |
|
|
TB-5952 A |
This application is now suspended by the tableBASE administrator. |
Contact your tableBASE administrator. |
|
TB-5953 E |
View defines Primary Key at 00000 which differs table location 00000. |
In order to use this View, you must make the Key size, Row size and Key location match the Data table. |
|
TB-5954 E |
View defines Primary Key size of 0000 which differs table key of 0000. |
In order to use this View, you must make the Key size, Row size and Key location match the Data table. |
|
TB-5957 W |
Line command ‘xxxx’ at row count ‘ ‘ requires target A or B. |
|
|
TB-5958 W |
Line command ‘xxxx’ at row count ‘ ‘ requires action command. |
|
|
TB-5959 E |
A hash table organization cannot support a block row delete. |
|
|
TB-5960 E |
The line commands are conflicting. Row location(s): , . |
Examine the conflicting location and place the line command appropriately. |
|
TB-5961 I |
Block command ‘xxxx’ at row count ‘ ‘ requires target A or B. |
Information only. |
|
TB-5962 I |
Block command ‘xxxx’ at row count ‘ ‘ is incomplete. |
Information only. |
|
TB-5963 E |
Invalid line command ‘xxxx’, please re-enter. |
Re-enter command as required. Typically this occurs if you are using an update line command such as U, N or D while in BROWSE mode. |
|
TB-5964 E |
A sequential or hash organization of ‘X’ cannot support a row move operation. The organization must be U or R. This can be accomplished with a change definition command. |
Use option 3 on the Table Define menu to change the table to be user ordered. |
|
TB-5965 I |
The number of rows deleted is |
Information only. |
|
TB-5966 I |
The number of rows moved is x to location y. |
Information only. |
|
TB-5967 I |
Line commands have been cleared. |
Information only. |
|
TB-5968 W |
Line commands following the selected row have been deleted. |
Under certain organizations multiple row line commands are not supported. |
|
TB-5969 E |
A table organization of ‘X’ cannot support a NEW nn command (insert at location nn operation). The organization must be ‘U’ (User ordered, Pointer or True) or the organization must be ‘R’ (Random ordered, True which is changed to User ordered by tablesONLINE). NOTE: A Random Pointer table is edited using a sequential index. In order to change the table organization, use option 3 on the Define Table menu. |
|
|
TB-5970 W |
Table is empty. Enter data here. To leave table empty select CANCEL. |
|
|
TB-5971 E |
Line command ‘XXXX’ invalid in multiple user table access. If you are trying to Delete a row, select the row for Update using the ‘U’ line command. Once the row is selected, type DELETE in the command line. (DEL or DE will also work. ) |
Because other users may be editing items, selecting an item first ensures that you have complete control first before deleting the selected row. |
|
TB-5972 E |
Multiple line commands are not supported for hash tables. |
The rows are physically in random order. |
|
TB-5973 E |
tableBASE error ‘xxxx’ occurred storing table/view ‘xxxxxxxx’. |
Refer to the tableBASE error return codes for more information. If problem not explained, contact DataKinetics tableBASE support. |
|
TB-5974 E |
Operation suppressed. You are not licensed to extend use of tableBASE. |
|
|
TB-5975 E |
Editing of VTS server tables is not supported. Try browse. |
You accessed a table residing on VTS that was accessed as a result of the VTS name appearing in the tableBASE library list as determined by your profile on the TBOLACT table. Contact your tableBASE administrator. |
|
TB-5980 E |
The table could not be opened because the Data Table ‘xxxxxxxx’ is not a pointer table. The Data Table must be defined as a pointer table in order to be accessed as an alternate indexed table. |
This occurs when the underlying data table is not defined as a pointer table. Change the INDEX attribute of the Data table to be pointer. |
|
TB-5985 A |
Error updating table ‘xxxxxxxx’, reason code 9999. |
Refer to the tableBASE error return codes for more information. If problem not explained, contact DataKinetics tableBASE support. |
|
TB-5986 A |
Table TBOLACT must be upgraded to Release 6. See Installation Guide. |
See Installation Guide for information on updating tablesONLINE/CICS. |
|
TB-5987 A |
Table TBOLPROF must be upgraded to Release 6. See Installation Guide. |
See Installation Guide for information on updating tablesONLINE/CICS. |
|
TB-5988 A |
Table TBOLCNST does not contain the default row, SIGNON terminated. |
An important ‘DEFAULT ….’ row is missing from the TBOLCNST table. This row must exist to launch TBOL for this CICS region. Contact DataKinetics tableBASE support. |
|
TB-5989 A |
Table TBOLMRO does not contain the default row, SIGNON terminated. |
An important ‘DEFAULT ….’ row is missing from the TBOLMRO table. This row must exist to launch TBOL for this CICS region. Contact DataKinetics tableBASE support. |
|
TB-5990 A |
An error occurred when attempting to terminate your session. |
Contact your tableBASE administrator. |
|
TB-5991 A |
Unable to open table ‘xxxxxxxx’, reason code 9999. Job Aborted. |
Refer to the tableBASE error return codes for more information. If problem not explained, contact DataKinetics tableBASE support. |
|
TB-5992 A |
Transaction work area 99999999 too small. It should be 99999999. Abort |
Contact your CICS system administrator. |
|
TB-5993 A |
Your application is not defined to the system, SIGNON terminated. |
Contact your tableBASE administrator. |
|
TB-5994 A |
Descript. ‘****NO DESCRIPTION ‘ not on tbl ‘xxxxxxxx’ |
An important ‘**** NO DESCRIPTION’ row is missing from the XXXXDESC table. This row must exist to launch TBOL. Contact DataKinetics tableBASE support. |
|
TB-5995 A |
Error creating table ‘xxxxxxxx’, reason code 9999. Job aborted. |
Refer to the tableBASE error return codes for more information. If problem not explained, contact DataKinetics tableBASE support. |
|
TB-5996 A |
tablesONLINE incomplete environment. |
Check for further tablesONLINE or tableBASE messages. |
|
TB-5997 A |
Message ‘5900 W Help message unavailable, . . . ‘ not on tbl ‘xxxxxxxx’ |
An important ‘5900 W Help ….’ row is missing from the XXXXMSGS table. This row must exist to launch TBOL. Contact DataKinetics tableBASE support. |
|
TB-5998 W |
Unable to save user profile. tBASE COND: |
This can happen if the tableBASE administrator has the TBOLPROF table open for edit |
|
TB-5999 A |
CICS error: command code ‘xx’ response code ‘xxxxxx’. Job aborted. |
Contact your CICS system administrator. |
|
TB-6000 A |
The VTS region ‘xxxx’ needs to be started before launching TBOL. |
Contact your tableBASE administrator. |
|
TB-6001 E |
The VTS region ‘xxxx’ needs to be started before ‘tttttttt’ can be opened. Another approach is to edit the TBSYSVTS table that specifies in which VTS region to open the table. |
Contact your tableBASE administrator. |
|
TB-9000 E |
Exit program ‘xxxxxxxx’ called with invalid indicators: xxxxxxxxxxxx. |
Contact your tableBASE administrator. |
|
TB-9001 W |
Table xxxxxxxx called exit with indicators: xxxxxxxxxxxx in test mode. |
Contact your tableBASE administrator. |
|
TB-9999 A |
CICS error: command code ‘xx’ response code ‘xxxxxx’. Job aborted. |
Contact your CICS system administrator. |
|
TBA1000 E |
There is no audit control record for this table. Contact administrator |
Contact your tableBASE administrator. |